In industrial heating equipment using the steel heating showing a lead single head heating tube, called a mold heating tube, electric industry in china,
称谓的型号：M3；在国外 称为弹筒式加热器。在选择 采购时要根据设备所使用的特征进行挑选，常规的模具单头加热管的有带螺纹单端电热管、L型单端电热管、单头加热管等几个样式，常见的 类型有内接高温线式、外接高温线式、出引出棒外接高温线、直接出 引出棒式这几个类型。因此选 择时需要根据实际所使用的环境和设备进行选择。
The title of model: M3; abroad as a cartridge heater. In the choice of procurement to selected according to the characteristics of the use of equipment, conventional Die single head heating tube with thread single end electric heating tube, L type single end electrothermal tube, single head heating tube and so on several styles, common types are inscribed high temperature wire type, external temperature line, a lead out rod outer the high temperature line, directly leads to the several types of stick. So choose according to the actual need by the use of the environment and equipment selection.
在模具单头加热管的设计 过程当中需要了解是设计为单向接线还是双向接线或者多种形式，材质的 选择也很重要是用有缝管还是无缝管或者不锈钢管等，需要对 加热设备有个清楚的判断。
In the design process of the injection mould for single head heating tube, need to know is designed for one-way or two-way connection or connection of various forms, the choice of materials is also very important is seamed tube or seamless pipe or stainless steel tube, need to have a clear judgement on heating equipment.
Comprehensive analysis of mold heating tube of different models but timber and performance design are common. Die single head electric heat pipe performance requirements are as follows:
1, the heating up time. In the test voltage, components from the environment temperature to test time temperature should not exceed 15 minutes.
2, rated power deviation. In the full range of heating conditions, components of the power rating of deviation should be no more than the prescribed.
3, insulation resistance. The factory inspection of cold insulation resistance should not be less than 50000000000000 ohm.
4, the insulation strength. Components should be in under the test conditions and test voltage for 1 minutes, but no flashover and breakdown phenomena.